August 2011 - Issue 47 - Dust Explosions - A Solvable Problem


Letter from the Editor: Welcome to the August 2011 issue of Fire Protection Engineering Emerging Trends, Fire Protection Engineering magazine's eight-time-per-year e-newsletter that deploys on the off-months of the magazine. Each issue will highlight a new trend and/or innovation in the fire protection engineering industry. This issue will focus on the prevention of dust explosions.

Please enjoy the August issue and thank you for your continued support!


Morgan J. Hurley, P.E., FSFPE





System Sensor - Now Hear This


Meet emergency communications system (ECS) requirements using your existing fire system and SpectrAlert® Advance audible visible devices from System Sensor – the world leader in life safety devices.


ALERT-printed on white housings, our amber lens strobes and speaker strobes provide visual signaling for emergency communications in compliance with ANSI/UL 1638 -- Standard for General Signaling Visible Appliances. Other ALERT-printed models provide clear lenses for use with color lens attachments that easily attach to strobe and speaker strobe devices without a candela derating.


To learn more about our ECS line and how it can save you time and money while meeting DOD and NFPA requirements, visit



Dust Explosions - A Solvable Problem


By: John M. Cholin, P.E., FSFPE


Research conducted by the Occupational Safety and Health Administration (OSHA) uncovered an average of five fatalities and over 28 additional injuries each year from combustible dust deflagrations and explosions.1 And when OSHA responded to the spate of large-loss incidents in the middle of the last decade with its National Emphasis Program (NEP), it found that there was wide-spread non-compliance with safety standards in the facilities it inspected. Failure to comply with safety criteria, such as those found in many of the NFPA "dust standards" for decades, can lead to large-loss dust explosions.

A combustible solid of sufficiently small average particle size will propagate a deflagration when suspended in air in a sufficient concentration and ignited.2 When a deflagration is confined within an enclosure, the release of heat and combustion products causes an increase in pressure that can cause the rupture of the confining enclosure. The deflagration can be more hazardous to people than the resulting building collapse or missile impact.

The technology for protecting the building occupants from enclosed vessels such as bins, bunkers, silos, mixers, blenders, and dust collectors, all of which can pose an explosion hazard, is well known. The relevant NFPA standards 3,4,5,6,7 stipulate how these enclosed vessels should be protected. While different standards prescribe slightly different solutions in some cases, the concepts are universally applicable across all of the combustible classifications (agricultural, forest products, metals, sulfur and general dust including plastics and chemicals).




Water Storage Tanks for NFPA 22 and 1142 Applications


Fiberglass underground tanks for fire-protection water are in high demand as a result of increased regulations and insurance industry requirements. Whether it is a sole source of water in rural areas or as a standby water reservoir to supplement a pressurized municipal water system, a Xerxes is the ideal choice.





  • 600 to 62,000 - gallon sizes
  • Rustproof, long-lasting fiberglass
  • Watertight
  • NFPA 22 listed design
  • Pressure Testable
  • Lightweight, easy to install
  • H-20 load rated
  • Wide range of accessories
  • NSF listed for dual use in potable-water applications


For more information, visit:



Where the sundry NFPA standards differ is in the prescribed method for hazard identification, if any, and the criteria for establishing the obligation to manage the hazard, especially as it pertains to occupiable building compartments. In this area there are two changes occurring in the NFPA dust standards.

The first is a transition from using the term "deflagration" to mean the expanding fire ball that propagates through the building interior to the term "flash fire." This later term has been embraced by the process chemical community and is in both NFPA 654 and NFPA 655. It has not been embraced in NFPA 664, but is under consideration by the technical committees responsible for NFPA 61 and NFPA 484.

The second is the development of clear criteria for determining if a deflagration or flash fire hazard exists in a building compartment. This determination is critical as hazard management obligations, including the use of fire resistant clothing for employees, are triggered by whether the building compartment is a deflagration or flash fire hazard.

For the past two revision cycles, NFPA 654, the general dust document that covers chemicals, plastics and dusts not covered by other standards, has used a 1/32nd inch (0.8 mm) layer depth criterion as the threshold for deeming a building compartment an "explosion hazard". However, the language used for this purpose was not as clear as it could have been. NFPA 664, the standard dealing with forest products, used a 1/8th inch (3 mm) layer depth criterion. Again, the language used was not as clear as it could have been. However, when the layer depth criteria in NFPA 654 and 664 are corrected for net heat of combustion and bulk density, they yield similar quantities of energy per unit of accumulation area. That provided a level of internal consistency between documents. Furthermore, there is no loss history for facilities that comply with these criteria.




2011 ANNUAL MEETING: SFPE Professional Development Conference and Exposition October 23-28


Mark your calendars for the 2011 ANNUAL MEETING: SFPE Professional Development Conference and Exposition being held October 23-28 at the Portland Marriott Downtown Waterfront in Portland, OR. Join leaders in the profession for a unique educational experience that is designed to keep you a step ahead. The two-day Engineering Technology Conference highlights presentations on advanced and cutting-edge practices in fire protection engineering. Following the conference is the Engineering Technology Exposition and eleven professional development seminars taught to leading industry experts.


For more information, visit


The hazard determination criteria for the other dust standards are quite different. NFPA 484, the combustible metals standard, does not allow any dust accumulation. Neither does the current edition of NFPA 655. However, the 2012 edition of NFPA 655 is adopting language similar to that in NFPA 654 and 664. Because of the bulk density of powdered sulfur, the layer depth criterion ends up at 1/16th inch (1.6 mm). An alternate method for hazard assessment is also included in the new NFPA 655 that based upon accumulated mass. How NFPA 61 and NFPA 484 deal with the hazard determination issue is yet to be seen as both of these documents are in revision.

The bottom line is that none of the tragic human injury and loss of life from dust explosions is necessary. None of the loss of facility and production capacity is necessary. The basic principles of how to prevent these incidents has been known for decades. Those basic principles are pan-industrial and are the basis for the prescriptive criteria in the NFPA occupancy design standards that pertain to dusts. While the improvements in these NFPA standards is welcome and is certainly the product of a lot of hard work by numerous dedicated committee members, with the notable exception of NFPA 61, there is no loss history in facilities that fully complied with current NFPA dust standards. NFPA 61 is unique in that it does not have an explicit fugitive dust layer accumulation criterion that is to be used for determining where there is a dust deflagration or flash fire hazard within a building. When considering an agricultural products facility covered within the scope of NFPA 61, a prudent design engineer will adopt the dust layer criteria of either NFPA 654 or NFPA 664, corrected for net heat of combustion and bulk density, for identifying those portions of the facility where a deflagration or flash fire hazard exists.


Despite having the ability to prevent dust explosions for decades, they still occur. A major contributing factor is operator awareness. Operators may be unaware of the hazard posed by combustible dusts, especially dust accumulations in building interiors. Fire protection engineers are obligated to apprise clients of this hazard. Any dry, solid material that is metallic, is edible, is eaten, was once alive, is derived from fossil life forms or is a compound that is not fully oxidized (in the chemical sense) is deflagrable if the particle size is sufficiently small.

John Cholin is with J.M.Cholin Consultants, Inc.


  1. Status Report on Combustible Dust National Emphasis Program, Office of General Industry Enforcement, Directorate of Enforcement Programs, Occupational Safety and Health Administration, Washington, DC, 2009.
  2. Zalosh, R. "Explosion Protection," SFPE Handbook of Fire Protection Engineering, National Fire Protection Association, Quincy, MA, 2008.
  3. NFPA 654, Standard For The Prevention Of Fire And Dust Explosions From The Manufacturing, Processing, and Handling Of Combustible Particulate Solids, National Fire Protection Association, Quincy, MA, 2006.
  4. NFPA 664, Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities, National Fire Protection Association, Quincy, MA, 2007.
  5. NFPA 655, Standard for Prevention of Sulfur Fires and Explosions, National Fire Protection Association, Quincy, MA, 2007.
  6. NFPA 484, Standard for Combustible Metals, National Fire Protection Association, Quincy, MA, 2009.
  7. NFPA 61: Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities, National Fire Protection Association, Quincy, MA, 2008.
Connect With Us
Fire Protection Engineering Related Sites